- Contact Person : Mr. Hong Jastin
- Company Name : Shenzhen TYH Technology Co., Ltd.
- Tel : 86-755-36909198
- Fax : 0755-82415072
- Address : Guangdong,shenzhen,Room 301B,Electromechanical building,Hongling north and Taoyuan road acrossing,Luohu district
- Country/Region : China
- Zip : 518000
Single band mobile phone signal booster,gsm mobile antenna booster
Tri band gsm signal booster,gsm home booster:
Cell phone signal amplifier is a products designed to solve the mobile phone blind signal. As the mobile phone signal is transmitted by electromagnetic waves to establish a communications link, the building of the barrier, in some tall buildings inside, the basement of some places such as malls, restaurants, places of entertainment such as karaoke OK sauna and massage, underground civil air defense projects, subway stations and many other places where cell phone signals can not reach and can not use the phone. Cell phone signal amplifier can solve these problems in a particular place as long as the installation of a mobile phone signal amplifier system, the entire range of mobile phone signals can be well used, staff or customers will get great convenience .
Name | GSM&DCS&PCS&CDMA&WCDMA Single band booster | |
| Technical Features:*Receiving and sending separation,low require for Ant isolation,making it convenient for installation.*Mini design with metal cavity filter technology inside.*Full-duplex&dual-port design,and built-in power supply,making it convenient for installation.*Allowing for continuous gain adjustment 31dB by 1dB step.*ALC technology used to provide auto amplitude fixing.*Modules structures,making it convenient for installation,debugging and maintenance. | |
Item | SK-GSM&DCS&PCS&CDMA&WCDMA | |
Frequency Range (Mhz) | Uplink: 890—915MHz,1710-1785MHz, 1920-1980MHz Downlink: 935—960MHz ,1805-1880MHz , | |
Gain (dB) | Uplink Gp≥55 Downlink ≥60dB | |
Pass Band Ripple | ≤5dB | |
band flatness | ≤+3dB | |
Guard Band Rejection | (BW-60dB)≤42MHz ,(BW-70dB)≤45MHz | |
I/O Impedance | 50Ω/N connector | |
I/O Return Loss | ≤-8dB | |
Export Power (Po) | ≥20dBm | |
Intermodulation Attenuation(Po=13dBm) | ≤-40dBc | |
Transmission Delay | ≤0.5μs | |
Ambient Temperature | -10°C~50°C | |
Power Supply | AC110~220V±10% 45~55Hz | |
Size | 260mmx145mmx80mm | |
Reliability | To the GB6993-86 Standard | |
Electromagnetic compatibility | To the ETS300 694-4 Standard | |
Function | a) Power supply LED denoteb) Export power LED denote |
Your system should come with at least the following items:
1) Outdoor Antenna (goes outside the building)
2) Siganal repeater
3) Indoor Antenna (goes inside the building)!
4) Coaxial Communication Cables
5) Connetor
6)Power Splitter
Steps:
Step 1 Start by taking your phone up to the roof or other location outside to find where the signal is strongest.
Step 2 Temporarily mount the Outdoor (outside) antenna in that location. You may need to adjust and move the antenna later.
Step 3 Run coaxial cable into the building to a convenient loaction (attic, etc.) where you can also get standard power for the Signal Repeater.
Step 4 Place the Signal Repeater in that location and connect the coaxial cable to the Outdoor Side of the Signal Repeater and the Outdoor antenna.
Step 5 Mount your Indoor (inside) antenna in a productive location. You may need to adjust or move the antenna later.
Step 6 Connect coaxial cable between the Indoor antenna and the Signal Repeater output port.
Step 7 Power up the system and check for signal inside the building. If needed, tune system by moving and or pointing the Outdoor and Indoor antennas until they get the most signal possible.
Step 8 Secure all antennas and cables, securely mount the Signal repeater and clean up the installation.
Application situations:
Mobile Signal Booster is specially designed for the “blind zones” of offices, family rooms, underground,parking garage, cars, lifts, elevators, factories, bars,
supermarkets, mountain areas,marines, deserts,high ways,tunnels,etc,
where the signal is very poor. Or in spite of full bar signals on the mobile phone,
there is a break in voice leading to call clarity problem. Simply place the mobile phone booster in such places, you'll be astonished with the huge gain in
both the incoming reception and outgoing transmission,levels as the mobile signal
booster goes to work!
Single band mobile phone signal booster,gsm mobile antenna booster